SH0248CQ Automatic solidifying point pour point cold filter point
tester
SH0248CQ fully automatic solidifying point pour point cold filter
point analyzer is developed in accordance with national standards
GB/T 510 "Method for Determination of Freezing Points of Petroleum
Products," SH/T 0248, and GB/T 3535. Utilizing advanced
technologies that integrate mechanical, optical, electronic, and
computer systems, it automatically measures the freezing point,
pour point, and cold filtration point of petroleum products. The
instrument employs photoelectric detection technology, an automated
glass tube tilting method, and an imported compressor-based
refrigeration system to ensure adequate cooling performance.
Technical Parameters and Features:
| Standards | GB/T 510 SH/T 0248 GB/T 3535 |
| Human-Machine Interface | 7-inch color LCD touchscreen |
| Refrigeration method | Fully enclosed high-efficiency refrigeration compressor |
| Cold trap for testing | 1 unit |
| Detection method | Imported photoelectric switch detection |
| Number of test holes | single hole |
| Temperature Range | +30°C ～ -70°C |
| Temp control accuracy | <±0.1°C |
| Sample Volume | Place at the marked line on the test tube |
| Refrigeration medium | metal bath cooling |
| Printer | Small thermal printer |
| Instrument dimensions | 650*480*620mm |
| Instrument weight | 75kg |
| Packaging dimensions | 690*520*660mm |
| Packaging weight | 80kg |
● Storage Method: The experimental results can store up to 199 sets
of historical data for easy retrieval;
● Result Output: It can also be equipped with a USB output function
to save data to a PC for long-term storage
● Output Format: The results should be exported to a USB drive in
CSV or Excel format.
● Standard Printing: Standard mini printer, automatic measurement,
automatic thermal printing
● Data Memory: The microcomputer instrument's memory can be
expanded up to 16G.
★ Remote Upgrade: Equipped with TCP network transmission
functionality, enabling software remote upgrades in the future
(optional)
★ Data Management: Connectable to LIS system (optional)
● If no personnel operate after the test, the chiller can be set to
automatically shut down within 0-50 minutes to avoid frequent
compressor startups and extend the instrument's service life
Note: The appearance images and dimensions of the instrument are for
reference only. Updates to the instrument may involve minor changes
without prior notice.
Turn on the power switch, and the instrument enters the following
main interface:
The main interface of the instrument is shown in Figure 1.
The four buttons above are main interface, parameter setting,
system setting and historical data.
The main display area is the trend chart of the temperature of the
sample changing with time, which can show the temperature value of
the sample and metal bath. The right display area will show the
specific value, and the lower part is the experimental results of
the expected cold filter point and test tube.
The lower right corner is the start button and the close button.
Parameter Settings are shown in Figure 2.
packing list
| S/N | Name | Unit | Quantity | Remarks |
| 1 | Automatic cold filter point tester | Set | 1 | |
| 2 | Cold filtration point suction filtration device | Set | 1 | |
| 3 | Cold filter point test tube | Piece | 1 | |
| 4 | Pipette | Piece | 1 | |
| 5 | Suction head assembly | Set | 1 | Brass housing, nut, strainer, etc |
| 6 | Pour point test tube | Piece | 1 | |
| 7 | Pour point sensor | Set | 1 | |
| 8 | Freezing point test tube | Set | 1 | |
| 9 | Condensation point sensor | Set | 1 | |
| 10 | Plastic tie | Piece | Some | L*W: 100 *2mm |
| 11 | Silicone tube left and right | Piece | 1 | |
| 12 | Fuse | Piece | 1 | |
| 13 | Power cord | Piece | 1 | |
| 14 | Instruction | Copy | 1 | |
| 15 | Packing list | Copy | 1 | |
| 16 | Certificate warranty card | Copy | 1 | |
Instrument Quality Assurance Certificate
Shandong Shengtai Instrument Co., Ltd. provides the following
quality assurance for the instruments sold to you:
----The provided instrument materials are brand new, meet quality
standards, and have a manufacturer's certificate of conformity;
----The materials and main components provided meet the technical
requirements specified in the technical documentation;
----The overall quality assurance period of the equipment is one
year (excluding normal wear and tear of vulnerable parts).
----We are responsible for free maintenance of any instrument
quality issues that occur during the warranty period. Due to
equipment malfunction caused by the user's responsibility, we are
responsible for repairing and charging reasonable fees.
----Lifetime discounted supply of parts for equipment, and lifetime
maintenance and repair of the entire machine.
----After the expiration of the warranty period, if the user needs
maintenance and technical services, we will only charge a cost fee.
Packaging and Delivery
1. Goods packaging: standard wooden or cardboard boxes.
2. Internal packaging: Elastic pearl cotton packaging product,
hardwood board+strong bandage to fix corners.
