SH129 Grease drum stability tester
SH129 grease drum stability instrument is applicable to standard
ASTM D1831 SH/T0122, the operation of the instrument: with a
certain amount of samples, at room temperature, after working on
the drum test machine for 2h, determine the work of grease before
and after the test coning degree.
The instrument is suitable for measuring the consistency change of
grease after working on the drum tester, and is used to judge the
mechanical shearing stability of grease.
Performance characteristics:
● Stainless steel roller Φ 90 * 180 mm, 5kg
● The idling wheel has a positioning ring to control the normal
operation of the drum;
● The lower part is equipped with a driving motor, so that the
speed is maintained in 155 ~ 180r/min;
● Belt drive drum;
● Microcomputer temperature controller, digital display, precision
±5℃, PT100 sensor;
● Digital timer, record working time, with a buzzer alarm;
● Can test two rollers at the same time;
● The instrument box cover oil a thermometer hole, can be
temperature correction;
Technical parameters
| Standard | ASTM D1831 SH/T 0122 |
| Heating mode | Electric heating coil |
| Timing | Digital timer |
| Temp control range | 21～38℃ |
| Motor speed | 155～180r/min |
| Work unit | 2 |
| Whole power | 1000W |
| Power supply | AC220V 50HZ |
| Instrument size | 500×440×450 mm |
| Instrument weight | About 30kg |
Note: The appearance pictures, dimensions, volume and weight of the
instrument are for reference only. If there are any updates to the
instrument, they may be slight changes without prior notice.
Packing list
| S/N | Name | Quantity | Unit | Remarks |
| 1 | Host | 1 | Set | |
| 2 | Roller | 2 | Piece | |
| 3 | Power cord | 1 | Piece | |
| 4 | Instruction | 1 | Copy | |
| 5 | Packing list | 1 | Copy | |
| 6 | Certificate warranty card | 1 | Copy | |
Shandong Shengtai Instrument Co., Ltd. provides the following
quality assurance for the instruments sold to you:
----The provided instrument materials are brand new, meet national
quality standards, and have a manufacturer's certificate of
conformity;
----The materials and main components provided meet the technical
requirements specified in the technical documentation;
----The overall quality assurance period of the equipment is one
year (excluding normal wear and tear of vulnerable parts).
----We are responsible for free maintenance of any instrument
quality issues that occur during the warranty period. Due to
equipment malfunction caused by the user's responsibility, we are
responsible for repairing and charging reasonable fees.
----Lifetime discounted supply of parts for equipment, and lifetime
maintenance and repair of the entire machine.
----After the expiration of the warranty period, if the user needs
maintenance and technical services, we will only charge a cost fee.
