SH110 Automatic Apparent Viscosity Measuring Instrument (CCS)
SH110 automatic apparent viscosity meter (CCS) conforms to
GB/T6538-2022, ASTM D5293 and other technical
specifications;Suitable for testing the low temperature dynamic
viscosity index of engine oil.The instrument can measure the
apparent viscosity of oil at temperatures ranging from -35℃ to -5℃
with an interval of 5℃.It has the advantages of accurate
measurement, good repeatability, stable performance and simple
operation.
It is suitable for measuring the apparent viscosity of engine oil
at -5~-30℃ under the condition of shear stress of about 1200 ~
20000 mPa. S and shear rate of 105~104 s-1.The instrument adopts
automatic temperature control equipment, users only need to operate
on the color touch screen can be convenient for testing and
analysis.
Apparent viscosity: Apparent viscosity is a physical concept that
refers to the quotient obtained by dividing the corresponding shear
stress by the shear rate at a certain velocity gradient. It is just
a relative rough comparison of the quality of fluidity. True
viscosity should be a part of irreversible viscous flow, and
apparent viscosity also includes the reversible high elastic
deformation part, so apparent viscosity is generally smaller than
true viscosity. The apparent viscosity can be further divided into
shear viscosity and tensile viscosity. The apparent viscosity may
be higher than the true viscosity or lower than the true viscosity.
On the engine oil, he can predict faults caused by insufficient
engine oil pumping performance.
| Testing items | Measure the apparent viscosity of engine oil at -5~-35 ℃ under
shear stress of approximately 1200~20000 mPa. s and shear rate of
105~104 S-1 |
| Standards | GB/T6538-2022 ASTM D5293 |
| Simple technical features or parameters | This instrument adopts a fully automatic temperature control
device, and users only need to operate it on a color touch screen
to conveniently and quickly conduct testing and analysis |
Instrument features
● The instrument adopts advanced microcomputer control, touch
screen human-computer interaction, calculation, display, printing
automation.
● Language of operation interface: optional setting (Chinese);
● Imported Omron temperature controller;Imported compressor
duplicated refrigeration, large cooling capacity
● Automatic detection speed, fine tuning knob to control the
current, reduce manual error;
● Adopt imported motor drive, high precision;Can store and print
experimental results
● Automatic calculation results after calibration of standard
oil;Adopt embedded operating system, work stably and reliably;
● The end of the test automatically shut down, and heating, in
order to facilitate rapid cleaning,
● The system can set the temperature according to the user,
according to the nonlinear curve to reach the set temperature
● The user can first calibrate the instrument with standard oil.
After the calibration, the relationship between viscosity and motor
speed can be described
● The instrument has calibration function, which can easily and
quickly calibrate each part of the system;
Technical parameters
| Temp measurement range | Normal temp ～ -70℃ |
| Cold bath temp control accuracy | ± 0.1℃ |
| Stator temp control accuracy | ± 0.05 ℃ |
| Viscosity measurement range | 1200-20000 mPa. s |
| Operating environment | 10 ℃ ～ 40 ℃ |
| Environmental humidity | <85% |
| Power | <2.5KW |
| CCS size | 420mm * 350mm * 520mm |
| CCS weight | 32kg |
| Refrigeration dimensions | 580mm * 420mm * 550mm |
| Refrigeration weight | 65kg |
| CCS packaging size | 480 * 390 * 580mm |
| CCS packaging weight | 42kg |
| Refrigeration packaging size | 630 * 460 * 620mm |
| Refrigeration packaging weight | 78kg |
Note: The appearance pictures, dimensions, volume and weight of the
instrument are for reference only. If there are any updates to the
instrument, they may be slight changes without prior notice.
Packing list
| No. | Name | Quantity | Unit | Note |
| 1 | Apparent viscosity tester | 1 | Unit | |
| 2 | Cold bath | 1 | Unit | |
| 3 | Suction filter pump | 1 | Piece | |
| 4 | Standard oil CL190 | 1 | Bottle | 50ml |
| 5 | Standard oil CL250 | 1 | Bottle | 100ml |
| 6 | Standard oil CL320 | 1 | Bottle | 50ml |
| 7 | Syringe 20ml | 8 | Piece | |
| 8 | Alcohol catheter | 1 | Piece | |
| 9 | Power cord | 1 | Root | |
| 10 | Fuse tube | 1 | Piece | |
| 11 | Instruction manual | 1 | Copy | |
| 12 | Packing list | 1 | Copy | |
| 13 | Certificate warranty card | 1 | Copy | |
Shandong Shengtai Instrument Co., Ltd. provides the following
quality assurance for the instruments sold to you:
----The provided instrument materials are brand new, meet national
quality standards, and have a manufacturer's certificate of
conformity;
----The materials and main components provided meet the technical
requirements specified in the technical documentation;
----The overall quality assurance period of the equipment is one
year (excluding normal wear and tear of vulnerable parts).
----We are responsible for free maintenance of any instrument
quality issues that occur during the warranty period. Due to
equipment malfunction caused by the user's responsibility, we are
responsible for repairing and charging reasonable fees.
----Lifetime discounted supply of parts for equipment, and lifetime
maintenance and repair of the entire machine.
----After the expiration of the warranty period, if the user needs
maintenance and technical services, we will only charge a cost fee.
