SD3536 Semi-automatic Open Flash Point Tester
SD3536 Semi-automatic open flash point tester is in according to
the standard of the People's Republic of China GB/T3536-2008
"petroleum products determination of flash point and burning point
Cleveland KaiKouBei act the requirements stipulated in the design
and manufacture, is suitable for the determination of the fuel oil
and oil products outside the mouth flash point is below 79℃, flash
point and burning point also support GB/T1671-2008 plasticizer on
the determination of flash point.
Semi-automatic Open Flash Point Tester
Semi-Automatic Cleveland Open Cup Flash Point Tester
Semi-Automatic Cleveland Open Cup Flash Point Tester GB/T3536-2008
SD3536Semi-automatic Cleveland Open-Cup Flash Point Tester
Main technical parameters and indexes
| Power supply | AC(220±10%)V,50Hz |
| Heating device | electric furnace heating, no flame, explosion-proof, power 0-600W
continuous adjustable |
| Temperature control | room temperature～400℃, grading 2℃, technical conditions in line
with the technical conditions of liquid thermometer used in
petroleum products test GB/T514 provisions |
| Temperature display | LED screen shows temperature parameters. The range is 0ºC～400ºC,
accuracy is 0.1ºC |
| Ignition device | (1) Ignition source: gas (or other civil combustible gas, the same
below) (2) Nozzle aperture: 0.6 〜 0.8 mm |
| Temperature sensor | RTD, PT100 |
| Ambient temperature | (－10～50)ºC |
| Relative humidity | ≤85% |
| Maximum power consumption | 650W |
| Package size: 380mm * 290m * 260mm Weight: 10kg |
Packing List
| S/N | NAME | UNIT | Quantity | Remarks |
| 1 | Open flash point meter | set | 1 | |
| 2 | Special brass oil cup | piece | 1 | |
| 3 | Special thermometer | piece | 1 | |
| 4 | instructions | copy | 1 | |
| 5 | Certificate of conformity warranty card | copy | 1 | |
Customers need to provide their own: coal gas source and coal gas
source required pressure reducing valve
Shandong Shengtai Instrument Co., Ltd. provides the following
quality assurance for the instruments sold to you:
----The provided instrument materials are brand new, meet national
quality standards, and have a manufacturer's certificate of
conformity;
----The materials and main components provided meet the technical
requirements specified in the technical documentation;
----The overall quality assurance period of the equipment is one
year (excluding normal wear and tear of vulnerable parts).
----We are responsible for free maintenance of any instrument
quality issues that occur during the warranty period. Due to
equipment malfunction caused by the user's responsibility, we are
responsible for repairing and charging reasonable fees.
----Lifetime discounted supply of parts for equipment, and lifetime
maintenance and repair of the entire machine.
----After the expiration of the warranty period, if the user needs
maintenance and technical services, we will only charge a cost fee.
