SH112CL Fully Automatic Four Hole Kinematic Viscometer
The SH112CL fully automatic four hole kinematic viscosity tester is
designed and manufactured in accordance with the requirements
specified in the Chinese standard GB/T265 "Petroleum Product
Kinematic Viscosity Determination Method and Dynamic Viscometer
Algorithm" for petroleum product kinematic viscosity determination
method, and is suitable for measuring the viscosity of light
colored petroleum such as lubricating oil.
Kinematic viscosity: It is the time it takes for a certain volume
of liquid to flow through a calibrated glass capillary viscometer
under gravity at a constant temperature. The product of the
capillary constant of the viscometer and the flow time is the
kinematic viscosity of the liquid measured at that temperature
Technical performance parameters:
| Compliant with standard | GB/T265 ASTM D445 |
| Temp measurement range | room temp -100 ℃ |
| Display accuracy | 0.01 ℃ |
| Display mode | Adopting human body sensing touch |
| Operation process | The entire process of sample temperature control, detection,
calculation, viscosity tube cleaning, drying, and report printing
is automated |
| Material of viscosity tube fixture | 304 stainless steel |
| Bath volume | 14L |
| Number of experimental holes | 2 holes on each side |
| Temperature setting | freely set the left and right bathtubs |
| Timing range | 0.0s ～ 99999s |
| Timing accuracy | ＜ 2000W |
| Working power supply | AC220V ± 10% 50Hz |
| Instrument size | 850 * 380 * 550mm |
| Instrument weight | 38kg |
● Compliant with standard: GB/T265
● Temperature measurement range: room temperature -100 ℃
● Display accuracy: 0.01 ℃
● Display mode: Adopting human body sensing touch screen
● Operation process: The entire process of sample temperature
control, detection, calculation, viscosity tube cleaning, drying,
and report printing is automated
● Viscosity tube fixture: made of all 304 stainless steel material,
with high and low temperature resistant graphite sliding bearing
device
● Bath volume: 14L
● Number of experimental holes: 2 holes on each side, allowing for
asynchronous measurement of two types of samples simultaneously.
Double layer insulation; Auxiliary heating automatic
● Temperature setting: freely set the left and right bathtubs
● Equipped with LED soft light, uniform fill light, easy to observe
● Timing range: 0.0s to 99999s
● Timing accuracy: no more than ± 0.01% within 60 minutes
● Detection method: Pt100 stainless steel probe with built-in
temperature correction
● Result output: It can also be equipped with a USB drive output
function to output to the PC for long-term storage
● Printer: equipped with a micro printer
● Power consumption of the whole machine: ＜ 2000W
● Working power supply: AC220V ± 10%; 50Hz
● Instrument size: 850 * 380 * 550mm
● Instrument weight: 38kg
Note: The appearance pictures, dimensions, volume, and weight of the
instrument are for reference only. If there are any updates to the
instrument, there may be slight changes without prior notice.
Shandong Shengtai Instrument Co., Ltd. provides the following
quality assurance for the instruments sold to you:
----The provided instrument materials are brand new, meet national
quality standards, and have a manufacturer's certificate of
conformity;
----The materials and main components provided meet the technical
requirements specified in the technical documentation;
----The overall quality assurance period of the equipment is one
year (excluding normal wear and tear of vulnerable parts).
----We are responsible for free maintenance of any instrument
quality issues that occur during the warranty period. Due to
equipment malfunction caused by the user's responsibility, we are
responsible for repairing and charging reasonable fees.
----Lifetime discounted supply of parts for equipment, and lifetime
maintenance and repair of the entire machine.
----After the expiration of the warranty period, if the user needs
maintenance and technical services, we will only charge a cost fee.
